|
Axle Nuts
- Shimano
- Front - 9x1 (also fits Suntour, Suzue "NJS", some others) - $9.50 each
- Rear - 10x1 (also fits Suntour, Suzue "NJS", some others) - $9.50 each
- Suzue - 3/8" x 26 - for Pro-Max SB hubs (sealed bearings) - $9.00 each
- Campagnolo
- Front - 9x26 - $26.50 each
- Rear - 10x26 - $26.50 each
- Aftermarket
- 9x1- $4.50 each.
- 10x1 - $4.50 each.
- 3/8"x26 - $4.50 each.
-
Axle Nut/Crank Bolt Wrenches
Axles and Axle Sets
- Aftermarket (axle only, Campy-Compatible)
- Front - 9x26 - $19.50
- Rear - 10x26 - $19.50
- Aftermarket (axle only, Shimano-Compatible)
- Front - 9x1 - $16.50
- Rear - 10x1 - $16.50
- Aftermarket axle set (Campy-Compatible)
- Front - complete axle set for model 1036 or 1036/2 front hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - $41.50
- Rear - complete axle set for model 1036 or 1036/2 rear hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - $44.50
- Shimano Dura-Ace
- Front - complete axle set for 7600 front hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - $46.50
- Rear - complete axle set for 7600 rear hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - $49.50
- Front - complete axle set for 7710 front hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - Out of stock
- Rear - complete axle set for 7710 rear hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - Out of stock
- Suzue Pro-Max (NJS type with traditional cup/cone bearings)
- Front - complete axle set for front hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - Sold out.
- Rear - complete axle set for rear hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - $46.50
- Suzue Pro-Max SB (sealed bearings)
- Front - complete axle set for front hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - $26.50
- Rear - complete axle set for rear hub (axle, 2 cones, 2 cone locknuts, 2 axle nuts) - $26.50
- Zipp Track Disc
- Rear - complete track axle set for Zipp rear disc wheels manufactured after mid 2005. Includes wheel axle nuts. - $79.50
Lockrings (all lockrings below have left-hand threads.)
Minimum sprocket size: 13t except as noted.
- 1.29 × 24 tpi -
- Shimano Dura-Ace - $8.00 each.
- Sugino - $13.50 each.
- Suntour (for 12t sprockets) - $19.50 each.
- Formula - $6.50 each.
- 33.5 × 24 tpi -
- Miche - $9.50 each.
- E.A.I. - $16.50 each.
- Campagnolo - $26.50 each.
- Phil Wood - Stainless steel. Can be used with cogs 12t and higher - $25.00 each.
Lockring Tools
- Hozan C-205 - double-ended (different radii) single-tooth lockring spanner - $22.50
- Hozan C-203 - slip-jaw lockring pliers provides good engagement on lockrings with opposing notches - $39.50.
1/8" Chain Whips (work on 1/8" or 3/32" track sprockets)
- Wheels Manufacturing - $18.50
- Shimano TL-SR20 - 1/8" chain whip with lockring spanner - Sold out.
- Shimano TL-SR22 - Shimano's newest generation 1/8" chain whip with lockring spanner - $39.50
1/8" Chainbreakers
- Park CT-7 - Heavy duty, fits 1/8" and 3/16" chains only - $35.00
Chain Tugs
- Generic - $7.50/pair.
- MKS (with 10 mm external adjuster bolt) -
- with 5 mm end caps. NJS certified. - $28.50/pair
- with 8 mm end caps. - $32.50/pair
Crank Bolts
- Shimano crank fixing bolt and washer for 7710 (splined) cranks - $27.50/pair ($17.50 each).
- Shimano dustcap for 7710 (splined) cranks - $9.50 each
Pump Parts
- Silca
- Silca Art. 25 chuck for disc wheels- $9.50 each
- Rubber grommet for Art. 25 chuck - $1.50 each
- Art.73.1 leather washer for floor pumps - $3.00 each
- Replacement rubber for Art 24.0 pump chuck (bell-shaped, presta only) - $2.00 each
- Hirame HP-20
- Pump chuck - Temporarily out of stock.
Tire Adhesives
- Continental Rim Cement- $3.50/tube
- Vittoria Mastik One Pro Rim Cement- $3.75/tube
- 3M FastTack - $10.00/tube
- Tufo Tubular Tape (two meter length, 19 mm wide)
- Velox Tubular Repair Kit (needle, thread, thimble, patches, rubber cement) - $9.85
- Jevelot Latex Solution - 4 oz. bottle - $9.50
Valve Extenders
- Wheels Manufacturing - $4.50 each (specify either 1.25" or 2" long)
- Vittoria - premium 30 mm. extenders for valves with removeable cores. Package of two, with core tool. - $13.50
- Vittoria replacement valve cores. - $1.50 each.
Handlebar Grips and Tape
- Keirin-style Rubber Grips
- Soyo Grips (175 mm.) - Rubber bar grips with file pattern gripping surface.
- Black, red or white. - $17.50/pair.
- Strong G Grips (175 mm.) - Rubber bar grips with textured gripping surface.
- Yellow, blue, red, white, black. - $22.50/pair.
- Strong G Grips "With Cord" (175 mm.) - Rubber bar grips with fibers impregnated in textured gripping surface .
- Yellow, blue, red, white, black. - $32.50/pair.
- Yoshida "Champ" Grips (165 mm.) - Rubber bar grips with textured gripping surface.
- Solids: red, orange, bright yellow, refrigerator white, pepto-bismol pink, magenta, black, navy, medium blue, powder blue, park bench green, ninja green, purple. - $21.50/pair.
- Translucents: translucent melon red, clear translucent, translucent ice blue, yellow snow, translucent pink. - $21.50/pair.
- Handlebar Grip Adhesive - Maruni "Earth" rubber cement. - $6.50/can (85 milliliters).
- Cotton Handlebar Tape
- Velox - "Tressostar" cotton handlebar tape. Adhesive backed. Black, blue, red, yellow or white. $3.50 per roll (you'll need two rolls to wrap both sides of a handlebar). No endplugs are included.
- Leather Handlebar Tape
- Brooks - Genuine leather handlebar tape. Adhesive backed. According to Brooks it "makes your steering more pleasant." Endplugs included. Black or honey. - $54.50/set.
Chainring Fasteners
- Sugino (steel, with knurled nut) - $17.50/set
- Shimano (steel, with knurled nut) - $22.50
- Campagnolo (steel, with knurled nut) - $36.50/set
- Miche (steel, set of five bolts only) - $10.00/set (for those generations of Miche track cranks with threaded spider arms)
- Park CNW-2 chainring nut spanner. Double-ended design fits most slotted chainring nuts. - $4.00 each.
Pedal Dustcaps
- MKS - Dome-shaped, threaded pedal dustcap fits MKS models "Royal Track" and "Sylvan", as well as Campy 1038 and 1038/A. - $5.00 each
- MKS - Flat, pressed-in pedal dustcap fits MKS Custom Nuevo. - $5.00 each
- MKS - Flat, pressed-in pedal dustcap fits MKS Royal Nuevo. - $5.00 each
- MKS - Domed, pressed-in pedal dustcap fits MKS RX-1. - $5.00 each
Hub Converters
- Surly "Fixxer" - kit for conversion of most wheels and hubs that use genuine Shimano freehub bodies (exceptions: Dura-Ace 6, 7, 8 or 10 speed) to fixed-gear use. Includes 10x1x174 solid axle. - $76.50
Professional Super Tool
- Makino Professional Super Tool - Trackside companion tool. See here. - $119.50
|
